DroneDeploy

Firmware Troubleshooting

Most issues related to flying with the DroneDeploy mobile app are due to incompatible firmware. Below is a guide to checking your firmware and compatibility.

Here, we will be explaining how to:

  1. Check the firmware on your aircraft
  2. Check compatibility with the DroneDeploy mobile app
  3. Get the correct firmware if needed.
  4. Update the firmware if needed.

👍

Make sure you have the newest version of DroneDeploy

Currently, this is V.2.0.11

DroneDeploy iOS app on the App StoreDroneDeploy iOS app on the App Store Android app on Google PlayAndroid app on Google Play

Checking firmware

📘

DJI GO app

The DJI GO app is very helpful for working through any issues in the DroneDeploy app (though please do keep in mind they cannot be open on your mobile device at the same time). Follow the steps below to check your firmware version.

Step 1: Turn on your system

Turn on your aircraft and remote control, and then connect to the DJI GO app via USB.

Step 2: Enter Camera View

Once you're in Camera view, you will see the menu button in the upper right. That button is shown inside a red box in the figure below.

Button highlighted in upper left

Step 3: Choose more options

Click the ellipsis icon in the bottom left of the screen.

Step 4: Scroll down to "About"

Choose "About" at the bottom to get more information.

Step 5: Check version

The firmware versions of your setup will be listed as shown below.

Check with DJI for the latest firmware version

Check with DJI to see the latest firmware available for your drone:

If the most recent firmware version number matches the one found on your setup, you're all set. If a newer version is available, please update your firmware before continuing to use DroneDeploy.

Updating firmware

📘

See here for step by step instructions on updating firmware on your aircraft.

Updated 11 months ago

Firmware Troubleshooting


Most issues related to flying with the DroneDeploy mobile app are due to incompatible firmware. Below is a guide to checking your firmware and compatibility.

Suggested Edits are limited on API Reference Pages

You can only suggest edits to Markdown body content, but not to the API spec.